Skip to content
Paint Calculator

How to Calculate How Much Paint You Need

Buy the right amount the first time: no second trip to the shop and no half-empty cans.

The method is the same for every room: find the area you will paint, work out how many square metres (or square feet) one litre (or gallon) of your paint covers, and divide. The steps below take a few minutes with a tape measure.

The quick formula

Net area = wall area − doors − windows
Paint needed = (net area × coats ÷ coverage) × (1 + waste %)

Step 1: Measure the walls

Measure the length of each wall you will paint and the height from floor to ceiling. Multiply length by height to get each wall’s area, then add the walls together. For a normal rectangular room, you can also add up the lengths of all four walls (the perimeter) and multiply once by the ceiling height.

Step 2: Subtract doors and windows

Measure each door and window opening, multiply width by height, and subtract the total from the wall area. A standard door is roughly 0.9 × 2.1 m (3 × 7 ft). If an opening is small or you are unsure, you can leave it in; the extra paint acts as a safety margin.

Step 3: Decide the number of coats

Two coats is the usual rule for an even, durable finish. Plan on a third coat, or a primer first, when you are covering a dark colour with a light one, painting bare plaster or new drywall, or covering stains.

Step 4: Find the coverage on the tin

Coverage is how much area one litre or gallon covers in a single coat. Most interior paints are in the range of 8 to 12 m² per litre (about 350 to 400 sq ft per US gallon), but it varies by product and surface. Rough, textured or very porous walls soak up more paint, so they cover less. Always use the figure printed on your tin.

Step 5: Add a waste allowance

Rollers, trays and brushes hold paint, and you will have spills and touch-ups later. Adding about 10% is a sensible default, and a little more for rough surfaces.

Worked example (metric)

A room has two walls of 5 m × 2.5 m and two of 4 m × 2.5 m, which is 45 m². One door (0.9 × 2.1 = 1.89 m²) and one window (1.2 × 1.2 = 1.44 m²) leave 41.67 m².

  • Two coats: 41.67 × 2 = 83.34 m²
  • At 10 m² per litre: 83.34 ÷ 10 = 8.33 litres
  • Plus 10% waste: 8.33 × 1.1 = about 9.2 litres
  • Buy: three 4-litre cans (12 litres), or two 5-litre cans (10 litres) if that size is sold

Worked example (imperial)

A room is 16 ft × 12 ft with an 8 ft ceiling. The perimeter is 2 × (16 + 12) = 56 ft, so the walls are 56 × 8 = 448 sq ft. One door (3 × 7 = 21 sq ft) and two windows (3 × 4 = 12 sq ft each) take away 45 sq ft, leaving 403 sq ft.

  • Two coats: 403 × 2 = 806 sq ft
  • At 350 sq ft per gallon: 806 ÷ 350 = 2.3 gallons
  • Plus 10% waste: about 2.5 gallons
  • Buy: three 1-gallon cans, or two gallons plus a half-gallon if sold

Choosing can sizes

Round up to the next size that covers your total, then compare the price per litre or gallon. A larger can is usually cheaper per unit, but a small extra can for touch-ups may be worth keeping. If the colour is mixed to order, buy everything at once so every can comes from the same batch.

Common mistakes

  • Forgetting coats. Dividing one coat’s area by coverage and stopping there halves your answer.
  • Using the wrong coverage. A generic figure can be 20% out. Check the tin.
  • Mixing units. Do not combine feet with litres or metres with gallons. Note too that a UK gallon (4.55 L) is larger than a US gallon (3.79 L).
  • Leaving out the ceiling and trim. These usually take different paint, so calculate them as separate jobs.

Try the Paint Calculator

Work out how much paint a room needs, with door and window deductions, coats, waste and cost.

Open the tool